Field of View Experiment

The aim of this experiment was to figure out how far ultrasonic sensor can detect.

Materials: ruler, maker, can, tape, ultrasonic sensor, and the robot

Procedure

1. Materials are checked before the experiment was run.

2. Tape is attached in the middle of the white board and marked every 10 cm

3. The robot is place at the very end of the tape


4. The can was placed randomly near the robot in order to figure out the area that the robot can detect the can.

5. The place where the can was detected is marked with tape.

6. This process was repeated to figure out the area that robot detect

7. Marked point is measure in coordinates


8. Distance was recorded in paper.